Product Description
, 612 Revolving CD Rack ,Media Storage Cabinet ,QuadWidth Media Storage Rack ,Sonax CR-2360 Cranley 21-Inch Wide Midnight Black Enclosed ,SEI 4-Column Cherry Media Shelf Product Description Display a flat-panel plasma or LCD television in style on this sturdy TV stand from the innovative minds at Z-Line Designs. Designed for 36-to-65-inch screens, the TV stand’s integrated mount sustains televisions with up to a 150-pound weight capacity without requiring wall installation. The mount swivels to adjust the screen angle for optimum viewing. Finished with a sleek piano black powder coat, the TV stand features a strong metal frame. A media storage drawer at the base of the stand contains DVDs, CDs, and remotes. For holding DVD/BluRay players, video game systems, stereo components and more, two shelves of 8mm clear tempered safety glass are provided above the drawer. Chrome cylinder supports hold up the shelves securely. With the stand’s open shelf design, air circulates around the electronic components to increase safety. Installed slots in the TV stand enable tidy cable management. For home assembly, the TV stand comes equipped with a universal hardware mounting kit and detailed instructions. The user can mount the screen at varying heights to best meet their personal home entertainment needs. Made in China, this item is covered by a limited lifetime warranty. The assembled TV stand measures 50 inches wide by 20-1/2 inches deep by 55 inches high.
This review is from: Z-Line Sync Flat Panel TV Stand with Integrated Mount (Electronics)
This stand has solved several problems I had, and 1 potential problem I was going to face. I have been wanting to mount my display for awhile now and just haven't been able to being in the apartment I'm in. The Sync stand solved that for me, next my receiver is pretty beefy and in the previous stand it just wasn't getting the clearance it needed for proper air flow. Again, fixed with this stand. Next like I said I'm in an apartment so I have to try to maximize the space I have and with my old stand I had to place my center channel in the upper component compartment and place my Blu Ray and DVR in awkward positions, this solved that for me. Providing me with enough room to get a new media storage unit that makes the entire room look cleaner and better. As well as allowing me to get a slightly larger sub, and I will now have room for the 65VT30 without fear of not having room. This stand is a life saver have it be your in a house or apt.
The stand itself is definitely sturdy, and will hold a 65" with ease. Each shelf is rated to hold 65 lbs and 150 lbs for the mount itself. So it can accommodate most set ups. The only downside I see with this stand and its not even really a downside just a little more effort is that since the way it is designed and how most will probably place their components you will have to be on top of wire management. I just ordered some zip ties and shorter hdmi cables. These will be your friend. If you have long wires it will be tough to hide them. Other then that the only other bad thing I have to say about it is the styrofoam is out of control in this thing. Definitely as other reviewers have mentioned vacuum while unpacking.
Assembly does take some time, but well worth the effort. My suggestions for assembly is have a vacuum available, and when you open the box, DO NOT open from the end and pull it out. Lay it flat and cut it open on the top so it opens like a door. Take everything out carefully and stage it if you have the room. After you get everything out hit it with the vacuum, and get the box out of the way. If you do this you won't have to worry about foam floating around everywhere.
Now step one is what actually takes the longest and it is the part where you're putting in cams, cam locks, and dowels. Now if your heavy handed and use a ton of glue you will run out. So use it just be cautious with it. Once you finish step 1, your home free. It takes about an hour to get from step 2-End. So it will probably take 1hr 45min or so if your pretty quick, maybe 2+ if your casual about it.
Also before you finish assembling decide where you want it then put the glass shelves on. Basically just skip that step, same with putting the drawer in. Much easier to move without the shelves, but put the shelves on before you mount the display. Also what helps is getting your components in place on the bottom shelf/drawer first then run your cables, etc, then once thats done put on the 2nd shelf (glass one over the drawer). Get your 2nd shelf all set up and then place on the top glass. Reason I say this is because its easier to maneuver without them.
Overall I'm happy, very happy. Even though it is a stand you almost don't think about it. It's like your display is just floating there. Very nice.
If your on the fence, GET OFF OF THE FENCE
get this stand. Great buy
ไม่มีความคิดเห็น:
แสดงความคิดเห็น